Screen Mirror (USB OTG) on Android v1.3 - intermittent "USB not connected" disconnects, 0 pkts #11

Device: Custom ESP32-WROOM-32U board with CC1101 module
USB-Serial chip: CP210x (VID=0x10c4, PID=0xea60, Silicon Labs)
App version: v1.3 (signed-bruce-app-release.apk)
Android: Samsung Galaxy A71, Android 13

Steps:

1. Connect device via OTG cable
2. Open Bruce App > Screen Mirror (USB OTG)
3. Tap "Start mirror"

Result:

• First session worked fine for a while, received packets (up to 59 pkts) while navigating with physical buttons on the device
• After disconnecting and reconnecting the cable, mirror got stuck at "Waiting for draw calls... navigate the device to trigger a repaint" with 0 pkts, even when pressing physical buttons that previously worked
• Terminal Output repeatedly shows "USB not connected. Attempting to reconnect..." on its own, without touching the cable
• Sending display start via Serial CMD returns "Command sent successfully" but does not fix the mirror
• Serial CMD (text commands) itself works reliably and consistently — only Screen Mirror is affected

I noticed v1.3 (which added "USB/OTG Screen mirror in Android") is no longer listed on the Releases page and the latest release is now 1.2 without this feature — is this a known issue that led to the rollback?